|
6000W PV INVERTER GRID-TIED
- INPUT DATA
- Maximum Input Power: 6500W
- PV Open Voltage: 500 VDC
- Nominal DC Voltage: 360~400V
- MPPT Voltage Rate: 150V to 600V
- System Start-up Voltage: 100 +/-5%
- Working Voltage: 100 +/-5% ~ 600 -5% +0V
- Initial Feeding Voltage: 150V +/-5%
- Max Input Current: 25ADC
- Full Rating Working Rage: 250V ~ 600V
- Shutdown Voltage: 80V typical
- DC Voltage Ripple: <10%
- DC Insulation Resistance: >8M ohm
- DC Switch: ON/OFF 30A
- DC Connector: Tyco or MC contact (3 Pair)
- Attached DC Connector: Tyco or MC contact
- OUTPUT DATA
- Nominal Output Power: 6000W
- Maximum Output Power: 6000W
- Operational Voltage Range (*a): 198V, minimum 256V, maximum
- Operational Normal Voltage: 230Vac
- Operational Frequency Range: 50/60Hz auto 47.5
- Nominal Output Current: 26.1A
- O/P Current Distortion (*d): THD<5%, each harmonics <3%
- Power Factor: >0.99
- DC Current Injection: <0.5% of rated inverter output current
- Internal Power Consumption: <10W
- Standby Power (at night): <0.1W
- Minimum Conversion Efficiency (DC/AC): >90% under input voltage >210V, load >20%
- Maximum Conversion Efficiency (DC/AC) (*e) : >96%
- European Efficiency: >95%
- GFCI Threshold (*f): See ground fault current detection
- Ground Current Detection Range: 0~500mA
- Ground Current Detection Frequency: 0~700Hz
- Protection Degree: IP65
- Operation Temperature: -20 deg ~ +55 deg Celsius
- Humidity: 0 to 95%, non-condensing
- Heat Dissipation: Convection
- Acoustic Noise Level: <40dB, A-weighted, frequency up to 20KHz
- Altitude: Up to 3000m without power derating 5 deg celsius derated for each additional 500m
- Physical Dimensions(W*D*H): 550 x 420 x 143mm
- Packing Dimensions (W*D*H): 660 x 580 x 265
- Physical Net Weight - G /W: 27 Kgs / 31Kgs
- *a = VDE0126-1-1, its -20% / +15%
- *b = Based on the limit of VDE0126-1-1
- *c = Based on limit of IEEE1547
- *d = Under utility voltage THD<3% reference IEEE1547, EN61000-3-2
- *e = Under input voltage>=400V, full rated output power 25 deg Celsius ambient
- *f = According to VDE0126-1-1 requirment
|